4iiii FLiiiight 업그레이드 매뉴얼 - 페이지 8

{카테고리_이름} 4iiii FLiiiight에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4iiii FLiiiight 10 페이지.

4.3 Parallelism

The space between the magnet array and your wheel rim

should be even from the front of the magnet array to the back.

Parallel

Align for parallelism:

1. Slightly loosen both mounting bolts.

2. Use the 3mm Allen Key to adjust one of two set screws

to change the mounting angle. Set screws are accessible

from the back of the load cell, in the screw holes

perpendicular to the mounting bolts.

a. If the magnet arrays skew right towards the

b. If the magnet arrays skew left towards the front

c. If you adjust the set screw too far in one

3. Re-check parallelism and concentricity.

front of the bike when viewed from above,

tighten the outer set screw, closer to the frame.

of the bike when viewed from above, tighten

the inner set screw, closer to the bike.

direction on your first attempt, resulting in the

opposite parallelism error, loosen the over-

tightened set screw slightly before attempting

to tighten the other one.

Non-Parallel