DataCard SD460 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} DataCard SD460에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCard SD460 7 페이지. For printers using the datacard xps card printer driver, usb and network
DataCard SD460에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (16 페이지), 빠른 설치 매뉴얼 (10 페이지), 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄
DATACARD
Frequently Asked Questions
Q:
Does the SD460 printer use the same ribbons as the SD Series printers?
A:
Yes, the SD460 printers use the same ribbons (with the addition of a few new ribbons) as
the SD Series printers.
Q:
Does the SD460 printer use the same laminates as the SP75/SP75 Plus printers?
A:
No, the SD460 printers have unique laminates that are not compatible or interchangeable
with the SP75/SP75 Plus printers.
Q:
Can I use my SP75/SP75 Plus laminator cleaning card in my SD460 printer?
A:
Yes, the cleaning card on both printers is the same for the laminator.
Q:
What are the power requirements?
A:
The SD460 system requires 100-240V, 50/60 Hz.
Q:
Does IDWorks® software work on the SD460?
A:
Yes, there is a new plug-in for IDWorks software which supports the laminator feature.
Q:
Can the CLM (Commercial Lamination Module) be used on the SD460 printer?
A:
No, if you try and connect the CLM (Commercial Lamination Module) to the SD460
printer you will get "mismatch error", the SLM (Standard Lamination Module) is the
only lamination module that will work on the SD460 printer. The CLM (Commercial
Lamination Module) is only compatible with the CD800 printer.
Datacard Group Contact Information
If you have any questions regarding the SD460 system, please contact your Datacard Group
regional service manager
®
SERVICE ANNOUNCEMENT
7