Datacolor 45 빠른 시작 지침 - 페이지 3

{카테고리_이름} Datacolor 45에 대한 빠른 시작 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Datacolor 45 11 페이지.
Datacolor 45에 대해서도 마찬가지입니다: 빠른 시작 지침 (7 페이지)

Stand Alone Operation

Starting the Instrument

To start the instrument, move the switch at the back of the instrument from the "0" position to the "|"

position. The instrument will power up and the main QC screen will display.

Navigating the Interface

Navigate the software display using the navigation buttons on the instrument. Use the left/right and

up/down buttons to move through the fields on the screen and the buttons on the Live Bar.

Below is an example of an output screen:

Datacolor 45 Quick Start Guide – 003-400063 Rev B

Program Navigation Buttons

The fields in top section having down arrows are used to

select standards, output displays and the

Illuminant/Observer.

The colorimetric data is displayed in the center of the screen.

In this start-up screen, the CIEL*a*b* color coordinates and

color differences are displayed

The information on this display depends on whether you are

in Standard mode or Batch mode. In Standard mode, you will

see absolute data and in Batch mode you will see delta or

difference data.

At the bottom of the screen is the Live Bar. It provides access

to program options and maintenance features. You can

navigate the Live Bar by using the left/ right program