Durr EcoGun 651 운영 매뉴얼 - 페이지 11

{카테고리_이름} Durr EcoGun 651에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Durr EcoGun 651 20 페이지. High-pressure automatic spraying gun

Important Rules for Fault-free Operation

» Cleanness of whole automatic gun and high-pressure nozzle.

» Properly treated control air (free of contaminants, water and oil).

» Filtered application material of proper viscosity - adhere to

instructions of manufacturers of the materials.

» Do not exceed necessary pressure for the NH atomizing in vain,

otherwise the operation life of the gun parts may be decreased.

» If the device was used for application of two-component substances

and materials of similar properties, only solvents recommended

by manufacturers of these substances can be used. Cleaning must

be performed always before expiration of the material pot life.

» On completion of work, the device should be regularly cleaned.

Compilation of regular cleaning and maintenance schedule is

recommended to ensure reliable function and life of the device.

CAUTION

Never put your fingers and/or hand to the spraying beam. The liquid pressure

can cause very severe injury with permanent damage of the skin.

Do not disassemble any part of the piston, when the device is pressurized!

EcoGun 651