Durr EcoGun 656 운영 매뉴얼 - 페이지 5

{카테고리_이름} Durr EcoGun 656에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Durr EcoGun 656 20 페이지. High-pressure automatic spraying gun

Workplace

Relevant standards apply to spraying and handling with the

flammable liquids. Regarding the flammability class of the coating

materials the areas and rooms, where the coating materials are

used, must be marked and modified in compliance with applicable

standards and regulations.

When the guns are used and operated in other countries, the

local standards and regulations apply.

CAUTION

All workers assigned to operation and maintenance of the device must be

provably acquainted with the safety regulations and with the device operation

and maintenance manual!

EQUIPMENT DESCRIPTION

The automatic high-pressure spraying gun EcoGun 651 is designed

to application of the liquids by pressure supply. The gun consists

from two functional parts:

» Front part of the gun mechanical sections consists from stainless

coating substance (hereinafter referred to as NH) distribution

box with needle sealing to prevent leak of the pressure supplied

NH. The connecting angle-adjustable fitting for the NH is fitted

with the M14x1.5 thread. The second inlet of the NH is blinded

by the G1/8" plug; when the plug is replaced with the NH

circulation line (not part of the supply), the NH circulation is

enabled (used for heavier NH etc.).

» The back part of the gun mechanical section consists from the

Duralumin body with pneumatic cylinder for opening (closing) of

the needle valve. The valve is opened by supply of the pressure

control air 5 bars before the piston by the 6 mm diameter hose.

Outlet of the pressure NH is closed by release of the air before

the piston to the atmosphere. The control air is separately

controlled by means of the three-way electro-magnetic valve.

In addition, the gun is fitted with the holder with 10 mm hole for

fixing to the handling device.

EcoGun 651