Durr XR25 운영 매뉴얼 - 페이지 7

{카테고리_이름} Durr XR25에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Durr XR25 14 페이지. Film processor

• Remove both bath covers (9) (only on model

1702-03 variable) from the developer and

fixer bath, let drip off and then lay aside.

• Take out Developer/Fixer roller set (27).

Firstly, lift the roller set vertically with both

hands, then carefully pour the remainder of

the chemicals into the baths over the front

side of the roller set.

• Clean all roller sets under warm water

(approx.40°C).

When cleaning the roller sets use the

correct coloured sponge.

Fixer - red

Developer - black

To disregard this advice could cause

contamination of fresh chemicals.

5.2 Cleaning the bath

• Lift bath (11) with both hands. Pour remaining

chemicals back into the tanks of the XR25.

• Rinse empty bath with warm water using the

appropriate sponges provided.