4IPNET EAP700 빠른 설치 매뉴얼 - 페이지 10

{카테고리_이름} 4IPNET EAP700에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP700 20 페이지.

Getting Started

4ipnet EAP700 supports web-based configuration. Upon the completion of hardware installation,

EAP700 can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or

Internet Explorer version 6.0 and the above.

The default values of LAN IP address and subnet mask of EAP700 are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

• To access the web management interface, connect the administrator PC to the LAN port of

EAP700 via an Ethernet cable. Then, set a static IP address on the same subnet mask as

EAP700 in TCP/IP of your PC, such as the following example (Please note that the IP

address used shall not be duplicated with the IP address of other devices within the same

network.). In the Local Area Connection Properties, selecting the Internet Protocol (TCP/IP)

Properties, use the following IP address as the default setting:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

• Launch the web browser on your PC by entering the IP address of EAP700

(http://192.168.1.1) at the address field, and then press Enter. The following Administrator

and then click Login to log in.

Username: "admin"

Password: "admin"

EAP700 Enterprise Access Point

- 8 -

Quick Installation Guide

ENGLISH