ELRO CZ60RIP11S 매뉴얼 - 페이지 17

{카테고리_이름} ELRO CZ60RIP11S에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ELRO CZ60RIP11S 19 페이지. Camera security set
ELRO CZ60RIP11S에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
ELRO CZ60RIP11S 매뉴얼

7.1 Edit device

Here you can change the name ELRO Monitoring to
e.g. "Camera driveway".
Advanced settings \Advance
Here you can change and confirm the
password.
Video settings \ Video quality
Video Quality selects the format in pixels. The
larger the size, the more memory of your
smartphone/tablet is used:
•
High
= 1920 x 1072
•
Medium = 1280 x 720
•
Low
= 0640 x 352
This information can also be found in the "Live
View" screen. Here the quality is mentioned
as: Good, Normal or Poor.
Light settings
You can setup the lighting in the app just as in the monitor;
Duration, Timer and Dimmer are also adjustable per channel.
Notification interval
Here you can set how long after the last detection you will receive a new notification.
•
- 3 MIN - A person enters the detection area and you receive a notification. The next
notification will only be made if motion detection occurs again after 3 minutes.
•
- Off - You do not receive any notifications, but motion is detected and videos are stored on
the Micro SD card (see "Monitor & Symbols Overview")
Device information
Here you can find your network information, nothing can be changed or set.

7.2 View events

Here you can view events. Press the magnifying glass to specify a search.
The recordings are stored on the Micro SD card and therefore do not use the memory of your
smartphone/tablet. (See 4.2.3 "Recording setup - overwrite file")
- 16 -