ELRO AS80PR 설치 지침

{카테고리_이름} ELRO AS80PR에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ELRO AS80PR 4 페이지. Pir motion detector

AS80PR11

PIR Motion Detector

Installation Instructions

General Introduction

This Detector is designed with a Passive Infra-Red (PIR) sensor and light sensor in

order to fulfill the purpose of security and home automation. It detects motion by

monitoring changes in infra-red radiation levels emitted by body heat.

Product Overview

PIR Lens

LED

(hidden

behind

PIR lens)

LED Indication

Red LED

Used to indicate trigger events, low battery power, and warm up

Green LED

Used to indicate key learning controls

Orange LED

Used to indicate no codes learned

Binding

1. Undo and remove the fixing screw from the bottom of the detector. Carefully

pull the bottom of the detector away from the rear cover and then slide down to

release the top clips.

Tamper Switch

Battery

/ Link Key

Fixing Screw

2. Prepare a CR123A battery. Do not insert the battery into the unit yet.

3. Log into the ELRO Smart Home Alarm account from a web browser.

4. Select "System" then "Add a Device".

5. Select "PIR Detector".

6. The following screen will appear. This means the gateway is entering binding

mode.