4IPNET EAP738 핸드북 - 페이지 17
{카테고리_이름} 4IPNET EAP738에 대한 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP738 19 페이지. Enterprise access point
Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)
To extend the wireless coverage, EAP738 supports WDS links on each RF card for connecting wirelessly to
other WDS-capable APs (peer APs). By default, all WDS profiles are disabled.
¾ Click on the Wireless button on the main menu.
¾ Select the Repeater Settings tab.
¾ Choose WDS as the Repeater Type.
¾ Choose the desired WDS profile:
(a) Enable WDS.
(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.
If you are using another EAP738 as the peer AP, simply repeat the above-mentioned steps to configure
another peer AP(s).
On each and every configuration page, you may click SAVE to save the changes of your configured
settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the
Note:
following message will appear: "Some modifications have been saved and will take effect after
APPLY."
Copyright © 4IPNET, INC. All rights reserved.
EAP738 Enterprise Access Point
12
H H andbook
ENGLISH