ELRO DV477IP3 매뉴얼 - 페이지 14

{카테고리_이름} ELRO DV477IP3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ELRO DV477IP3 16 페이지. Ip video door intercom with 7" (18cm) monitor

•

Press the added device (3),

you will now be asked for

the password (4) of the

main user.

Note

With limited rights there is

no access via configuration

to advanced settings.

10. Removing device

•

Removing a device from the

app is very easy. Open the

app and slide to the left,

press delete and the device

will be removed from the

app.

If the pairing of the ELRO Intercom app fails and you are convinced that you are using the

correct WiFi signal (2.4Ghz) with associated password, it is recommended to reset the

monitor. Proceed as follows:

Press the key with the key for at least 5 seconds, the monitor will start the reset procedure.

When the reset procedure is in operation you will hear: "Reset parameter is succesfull, the

system is about to restart". This means: "Reset parameter is successful, the system is about

to restart".

Then wait until the monitor reports with the text: "Please setup network by your mobile

application". This means: "Please setup network by your mobile application". Mobile

application refers to your Android or iOS smartphone/tablet.

You can now try again to connect the app to the WiFi monitor.

- 13 -