Datacom Systems VS-1224-F 빠른 설치 매뉴얼 - 페이지 12

{카테고리_이름} Datacom Systems VS-1224-F에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datacom Systems VS-1224-F 17 페이지. 10/100/1000 mb and 10 gb data access switches

페이지 인쇄

VS-1212-F and VS-1224-F Data Access Switches

4.2

Port Connection

This section will focus on the PORT connection of the typical VS-1212-F Data Access Switch

hardware installation. The VS-1224-F Data Access Switch hardware installation is similar to the

typical VS-1212-F Data Access Switch hardware installation.

Step 1. Connect the network cables to PORT sockets as has been determined in your data access

switch network layout. The LED display above each port will indicate LINK as defined in the LINK

STATUS KEY box.

Step 2. Continue repeating Step 1. for any remaining PORT you want to connect from the VS-

1212-F Data Access Switch or VS-1224-F Data Access Switch.

Management Connection

Once installation of the VS-1212-F Data Access Switch and VS-1224-F Data Access Switch has

been completed in your chosen network location.

This section will focus on the MANAGEMENT PORT 10/100/1000 Mbs Full-Duplex connection of

the typical VS-1212-F Data Access Switch and VS-1224-F Data Access Switch hardware

installation.

Connect a network cable to the MANAGEMENT port RJ45 socket. The MANAGEMENT port RJ45

left LED illuminates

port right LED illuminates

the network via Web Browser, Telnet or SSH as explained in the following sections.

when link has been established with the network. The MANAGEMENT

green

when passing data. Management connection may be initiated over