4IPNET EAP757 사용자 설명서 - 페이지 20

{카테고리_이름} 4IPNET EAP757에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET EAP757 20 페이지. Enterprise access point

2.4 Access Web Management Interface

4ipnet Access Points support web-based configuration. When hardware installation is complete, the AP can

be configured through a PC by using a web browser.

The default values of the AP's LAN IP Address and Subnet Mask are:

IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

Example of entering the AP's default IP Address into a web browser



To access the web management interface (WMI), connect the administrator PC to the LAN port

of the AP via an Ethernet cable. Then, set a static IP Address on the same subnet mask as the AP in

TCP/IP settings of your PC, such as the following example:

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

Please note that the IP Address used should not overlap with the IP Addresses of



Note:

any other device within the same network to avoid IP conflict.



Launch the web browser on your PC and enter the IP Address of the AP (192.168.1.1) at the

address field, and then press Enter. The following Administrator Login Page will appear. Enter

"admin" for both the Username and Password fields, and then click Login.



After a successful login into AP, a System Overview page of the Web Management Interface

(WMI) will appear.

Administrator Login Page

User's Manual

Enterprise Access Point ENGLISH