DataCube DC-485V 사용자 설명서 - 페이지 5
{카테고리_이름} DataCube DC-485V에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataCube DC-485V 15 페이지.
페이지 인쇄3. USB Memory
3.1. Automatic data saving
When a USB memory device is connected to the DataCube, the data collected during the
past day is automatically downloaded to the device as a CSV file at about 04:00 in the
morning.
Two files are downloaded, a data file and a log file. The files are named as shown below,
where YYYYMMDD is the date representation format for the day the data was collected.
dataYYYYMMDD.csv
logYYYYMMDD.csv
The data for any date can be accessed with a Web browser.
See section 4.5, "Report screen."
3.2. Inserting the USB memory device
There are two USB ports, one of which is covered by a cap.
Insert the USB device into the port that is not covered.
The red LED will blink for a short time.
3.3. Removing the USB memory device
1.
Hold the tactile switch down until the red LED begins to blink.
2.
When the red LED begins to blink, release the tactile switch.
3.
When the red LED turns off, remove the USB memory device.
While the red LED is blinking, the DataCube is transferring the data for the day to the USB
memory device in preparation for safe device removal.
3
DataCube User Manual