Cavius 4002-001 사용자 설명서 - 페이지 9

{카테고리_이름} Cavius 4002-001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cavius 4002-001 15 페이지. Carbon monoxide alarm device
Cavius 4002-001에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지)

페이지 인쇄

Test function:

After installation and at least once per quarter,

test your alarm to make sure it is operating

correctly.

When the bottom button is pressed the alarm

will sound, once the button is released, the

alarm will conduct a self-test of the sensor

and battery for approximately 9 seconds.

During this delay all three LEDs will flash

in sequence. The result of the test will be

indicated once the test is completed.

14.

If the test passes, the alarm indication will be

triggered for one sound sweep and the green

LED will flash for 3 seconds. If the test fails, a

fault indication will be given (See page 17).

After the test function is performed, the alarm

will need to recover for 60 seconds before

another test can be conducted (to allow the

sensor chamber to resettle).

The alarm will also conduct a self-test every

24 hours, which tests for a faulty sensor, drift

or short circuit.

TIP: It is safe to cover the sound output hole

with your finger during the testing to minimize

the sound level emitted.

15.