Durst Hypastart X1500 사용 설명서 - 페이지 3
{카테고리_이름} Durst Hypastart X1500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Durst Hypastart X1500 7 페이지.
페이지 인쇄
PG 4
SUPER
CAPACITOR
STATUS
WARNING:
Do not switch to START
unless the READY light is on
CHARGER
STATUS
READY - The green light indicates your Hypastart is ready
for operation. The green light will turn on when the
supercapacitor voltage reaches 13.5V being 50% capacity
level. The Hypastart will continue to charge to a maximum
of 15.0V.
ENERGIZE - Indicates that the charge/energize
process is active.
SUPERCAPACITOR STATUS - This LCD display shows the
supercapacitor active voltage and capacity level indicated
in a 0-100 percentage form. Supercapacitor voltage and
capacity ranges from 12V to 15V, with 12V being 0% and 15V
being 100% with a maximum of 15.0V.
PLEASE NOTE THAT THE HYPASTART DOES
NOT NEED TO BE AT 100% CAPACITY LEVEL
TO OPERATE
OPERATING
INSTRUCTIONS
OFF
ENERGIZE
ENERGIZE
12 VOLT
24 VOLT
START
START
OFF - Your Hypastart should always be in the off position
when not in use.
ENERGIZE - Your Hypastart has two Energize switches
and is used to energize the unit prior to starting the engine.
Depending on the engine size you are starting, you can
either select 12V or 24V start.
12V START - This is the 12V starting position and only be
to used on a negatively grounded vehicle.
ONLY SWITCH TO THE 12V START WHEN
THE GREEN LIGHT IS ON
24V START - This is the 24V starting position and only to be
used on a negatively grounded vehicle
ONLY SWITCH TO THE 24V START WHEN
THE GREEN LIGHT IS ON
OPERATING
INSTRUCTIONS
PG 5