Dataforth SCM9B-D192 Series 사용자 설명서 - 페이지 7

{카테고리_이름} Dataforth SCM9B-D192 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataforth SCM9B-D192 Series 7 페이지.

7 SCM9B-D192 USERS MANUAL

FACTORY RS-485 TERMINATION SETTINGS

Each SCM9B-D192 contains internal pin strips for enabling the internal

termination and biasing resistors. Each pc board is clearly marked with the

jumper designators adjacent to each row of pins. The jumper designators

are +1K, 220 and -1K. To enable any resistor, place a jumper over the

pins next to the required designator. The factory switch and jumper

settings are outlined below.

S C M 9 B - D 1 9 2 :

Baud Rate: 300 baud switch up.

RS-485 (J3):

Isolated RS-485 (J2):

Biasing Resistors: +1K, -1K jumpers installed.

Termination Resistor: 220 jumper installed.

Biasing Resistors: +1K, -1K jumpers installed.

Termination Resistor: 220 jumper not installed.