Cavotec MC-3-5 운영 및 유지보수 매뉴얼 - 페이지 4
{카테고리_이름} Cavotec MC-3-5에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cavotec MC-3-5 9 페이지. Industrial remote control
페이지 인쇄
Micro-control as
1. General information
1.1 The main parts of the system
An MC-3-series system mainly consists of the following parts:-
• Terminal
• Carrying belt/strap
• Rechargeable Batteries
• Battery charger
• Base unit
• Antenna
1.2 Security/ Safety
The MC-3-series system is produced to ensure safe control of machines. The following security
functions are built into each:-
•
A unique serial number for each system, means one system cannot operate another.
•
A check-sum in the data transmission ensures that the system only recognises valid data.
•
Double monitoring of joysticks.
•
An activity check during start-up prevents the terminal from starting if a switch or joystick is faulty,
or if a security critical function is active.
•
Self-checks and continuous monitoring.
MC-3-series is designed in accordance with the Low Voltage Directive (73/23/EEC), the EMC-
Directive (89/336/EEC), and the Machinery Directive (89/392/EEC, 91/368, 93/44/EEC). Further
standards and certificates may be included depending on the application.
The system is certified according to the Federal Communications Commision rules Part 90 sub clause
217. To maintain the distance of 20cm from the body to the antenna as required in the rules the
terminal should only be used with the carrying belt.
MAN-05-006
Operation and Maintenance Manual for MC-3-series
- contains the pushbuttons, joysticks etc that the operator carries.
- belt or strap to carry the terminal safely.
- placed in the terminal to provide it with power.
- recharges the battery from a permanent supply.
- the main part of the system connected to the machine or PLC.
- located on or connected to the base unit with a coaxial cable.
Page 4 of 9
Rev. 1