Elsema iS300 사용자 설명서 - 페이지 8

{카테고리_이름} Elsema iS300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema iS300 12 페이지. Swing gate opener

F. MOTOR FIXING

While the motor is disengaged, remove the wire cover and fix the rear bracket with the pin. The

pin will slot into the hole with the threaded side up as shown in no.1. No screw is required to

hold the pin in place. Attach the front bracket to the drive unit with the nut provided as shown

in no.2.

Make sure the iS300 is mounted in a horizontal position, especially in these positions:

1) Gate in "CLOSE" position

2) Gate in "OPEN" position

3) Gate at "45° angle" position

Prior to welding the bracket on the gate leaf( if necessary), cover the gate opener to prevent

damages from sparks.

G. WIRE CONNECTION

Avoid tension in the cable during opening and closing cycles

iS300/iS300D/iS300Solar SWING GATE OPENER MANUAL

To connect the iS300 with the control unit

White

Yellow

Motor (+)

Motor (-)