Elsema Gigalink GLR2702 매뉴얼 - 페이지 2

{카테고리_이름} Elsema Gigalink GLR2702에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema Gigalink GLR2702 8 페이지. 2-channel 27mhz receiver

페이지 인쇄

When programming is completed and the GIGALINK cable is removed from the multi channel receiver-coding

socket, the 2-way dip switch is used to select different output modes. This is described below.

Output Modes

Relay output on the receiver can function in either momentary or latching mode. By default the mode is set to

momentary. Modes selectable from the 2-way dipswitch. Dipswitch 1 corresponds to relay channel 1 and

dipswitch 2 corresponds to relay channel 2.

Factory Default = Momentary

Momentary - Output is active for as long as the transmitter button is pressed.

This is a standard mode on most automatic gates or garage door openers.

Latching

- Output remains active until next press of the transmitter button.

Similar to switching "on" and "off" a light.

- Output remains active until power to the receiver is removed. Similar to security alarms

Security

Latching

and fire alarms. To activate the security latching mode, a link needs to be soldered into the

hole marked as latching.

Customised Software

Custom output modes can be programmed to do special functions. Call Elsema for more details.

Products in the Range

GLR2701

GLR2701240

1-Channel

1-Channel, 240V

GLR2704

GLR2708

4-Channel

8-Channel

Receiver

GLR2702

GLR2702240

2-Channel

2-Channel, 240V

GLR2708R

8-Channel with

1,2 -Channel, Open

Relay Output

Collector Output

- 2 -

2-Channel 27MHz GIGALINK™ Receiver with relay outputs, GLR2702

3-Channel Receiver

GLR2701SS

GLR2702SS

1,2 -Channel, Open

Collector Output

ELSEMA

GLR2703

GLR2701SST

GLR2702SST