Elsema FMT-404NL 매뉴얼 - 페이지 4

{카테고리_이름} Elsema FMT-404NL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema FMT-404NL 6 페이지. High powered, handheld 27mhz remote control digital transmitter with led

페이지 인쇄
Elsema FMT-404NL 매뉴얼
ELSEMA
High Powered, Handheld 27MHz Remote Control Digital Transmitter – FMT-401, FMT-402, FMT-404
Using FMT-402 and FMT-404
To Use FMT-402 with a 2 channel receiver, and FMT-404 with a 4 channel receiver, just match the 10 way
dip switch on the transmitter to the receiver.
Using 2 Different Receivers with FMT-402
FMT-402 can also be used with 2 different single channel receivers e.g. FMR-212.
Make sure the 10 way dip switch on the transmitter board matches the first 10 dip switches on the receiver.
Set the receivers dip switch 11 and 12 as described below.
When Button A is pressed, dip Switch 11 is transmitted as "ON" (Dip switch 11 on the Receiver is up)
When Button B is pressed, dip Switch 11 is transmitted as "OFF" (Dip switch 11 on the Receiver is down)
When wire link is connected (Factory default), dip switch 12 is "ON" (Dip switch 12 on the Receiver is up)
When wire link is disconnected (cut), dip switch 12 is "OFF" (Dip switch 12 on the Receiver is down).
(see picture below for the location of the wire link)
- 4 -