Elsema Intelligent Swing iS400D 사용자 설명서 - 페이지 5

{카테고리_이름} Elsema Intelligent Swing iS400D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema Intelligent Swing iS400D 12 페이지. Swing gate opener with limit switch

페이지 인쇄

B. CHECKS BEFORE INSTALLATION

Before proceeding with the installation check the following:

1) Check that the motor mounting position on the gate pillar can be done with the measurements

in Figure 1 and Graph 1

2) Be sure that gate moves freely

3) There are no obstacles in the moving gate area

4) Hinges are properly positioned and greased

5) There should be no friction between the gate leaf's

6) There should be no friction with the ground while moving the gates

7) Check that the gate structure is suitable to install automatic gate motors

8) "C" value is 140mm

9) "D" can be measured from the gate easily

10) "A" = "C" + "D"

11) The value of "B" can be calculated from the value of "A" and the leaves opening angle

**Please make sure "B" and "A" are similar or the same in value that the leaf's can be operated

smoothly, also to reduce the burden of the motor.

Fig 1

iS400/iS400D/iS400Solar SWING GATE OPENER MANUAL

Graph 1