Elsist Pure 1000 사용 설명서 - 페이지 12

{카테고리_이름} Elsist Pure 1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsist Pure 1000 18 페이지. Single phase line interactive sinewave ups

PURE 1000●2000●3000

LINE INTERACTIVE SINGLE-PHASE

SINEWAVE

Line buck Mode

Battery Mode

Fault Mode

Standby Mode

Ver.00 09 March 2018

When input AC mains is high, the

UPS works in line buck mode,

charge the battery and protect the

load.

When input AC mains is output of

line range, the UPS works on

battery mode. The green LED is

on the yellow warning LED blink

once 4 seconds and buzzer beep

and if the battery voltage is low,

blink once 1 second and buzzer

beep.

When the UPS has fault. The red

LEDs is ON and the buzzer

beeps. The UPS will turn to fault

mode. The UPS cuts off the

output and the LCD display fault

codes.

NOTE:

for

corresponding

information of the fault code,

please

refer

3.7

Reference Code.

When UPS is plugged into line

and not turn ON, the UPS will

work in standby mode to charge

the battery. No indicator displays

on this mode.

Faults