DataLocker H200 사용자 설명서 - 페이지 11
{카테고리_이름} DataLocker H200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker H200 12 페이지. Encrypted, biometric hard drive
페이지 인쇄TROUBLESHOOTING
Table 1: LED status for devices
LED status
Flashing Red
Solid red
Blue LED
Flashing red and
blue
Status of power to device
Solid yellow
Flashing yellow
Flashing yellow
No yellow LED
cont.
Description
The device is either powering up or is totally blocked. When totally blocked, no
authentication methods are available to allow a user to log into the device; this
indicates that the device needs to be recycled.
The device is locked.
Indicates a data transfer activity for all devices.
Indicates that a fatal internal error has occurred.
Sufficient power from the host computer is available and the device is operating
normally.
Insufficient power to operate the device. Attach both USB connectors to the host
computer. If both connectors are already plugged in, and the LED continues to
flash, the host computer does not meet the USB power requirements.
Power detection has timed out. Unplug all USB connections and reconnect the
them.
No power is detected. Device is off.
11