Duschservice shower seat 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} Duschservice shower seat에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duschservice shower seat 16 페이지.
페이지 인쇄367-2
Please adhere to the following instructions in order to optimise the
functionality and longevity of your Grab Handle/ Shower Seat.
1. General
Check your shower seat for transport or other damage prior to installation. No warranty claim
for damage will be accepted after installation.
2. Installation
In order to guarantee trouble free functionality of your product it is imperative to carry out the
installation step by step according to the instructions. If there is any reason for complaint or if
you have technical query, please do not hesitate to contact our service hotline for help.
The screws & rawlplugs provided are for installation on to concrete walls. Please check
the construction of your wall and use screws & rawlplugs which are suitable to the
construction of your wall. If you are uncertain, please contact a professional plumber or
builder
3. Maintenance and care
This grab handle/ shower seat consist of high quality materials. Please rinse your seat after every
shower and clean it with a damp cloth. Do not use any abrasive cleaners.
anchor ground/wall work
concrete
full bricks
natural stone
lime sand stone
full build materials
light build walls with back
ventilation of layer wood plates or hard
wood ( necessary at least 20mm strong)
for example carry stands from the front
wall manufacturers
light build walls with integrated front
wall installation and integrated iron
plates for example carry stands from
the front wall manufacturers
high hole bricks
hollow block stone
lime sand stone
other hole stones
pore concrete P2/P4
light concrete
fullstone of light concrete V2/V4
gips wall building plates
pore concrete (one corn concrete)
fix up materials
6x six edge wooden screw DIN 571-A2-8x90
6x full purpose plugs TRIKA 10/62
6x six edge wooden screw DIN 571-A2-8x90
direct fastening without plugs
6x six edge wooden screw DIN 933-A2-M8x60
6x six edge wooden screw DIN 571-A2-8x90
6x full purpose plugs TRIKA 10/62
6x six edge wooden screw DIN 571-A2-8x90
6x injections-anchor shell FIS H 14x90K
6x injections screw in anchor FIS E8 x 85k
1x injection mortar FIS VS 150 C
1x central spout PBZ
1x Konus drill PBB
comment
belongs to the delivery range
of the showerseat
belongs to the delivery range
of the showerseat
to set on building site !
belongs to the delivery range
of the showerseat
to set on building site !
special retailer
5