Cayin IDAC-6 사용자 설명서 - 페이지 6

{카테고리_이름} Cayin IDAC-6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cayin IDAC-6 11 페이지. Hi-fi audio d/a converter

same specification with the original.

Power input connector

Connect to AC Power supply

Note: Please make sure the AC Voltage Selector is setup correctly for your local

power supply voltage. Incorrect input voltage setting will cause damage to the

machine or might even lead to serious household accident, Cayin reserves the right to

refuse service or responsibility on related instances.

Preparation

Connect Power source

Verify that the AC Voltage Selector has been set correctly for your local power

supply voltage, then plug in a power cord and connect to a AC power outlet.

When selector is set at "230" (as displayed on the selector), the DAC is set to

work with 220V-240V power supply voltage. When selector is set at "115" (as

displayed on the selector), the DAC is set to work with 110V-120V power supply

voltage.

Attention: Please make sure the power cord has been disconnected before you

adjust the setting of the AC Voltage Selector.