DataLocker Sentry K300 사용자 설명서 - 페이지 6

{카테고리_이름} DataLocker Sentry K300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 19 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 배포 매뉴얼 (10 페이지), 검토자 매뉴얼 (10 페이지)

페이지 인쇄

1. Password Reset

changed, or when the Auto Lock timeout and Minimum Password length are being deﬁned. Button

will function as Down on the Selection and Menu screens.

Hardware Reset: Located between the four corners of eight (8), nine (9), power/backspace, and

enter. Press button lightly with a dull pin tip to perform a hardware reset on a device that has

become nonfunctional. This will reboot the drive if it becomes unresponsive. Note: Do not press this

button with a sharp object at the risk of puncturing the button.

Alpha-Numeric Buttons: Secure passwords can be created using letters and/or numbers. Each

button has one number and three to four letter options to choose from. Press the selected button

repeatedly within 1 second until the desired character is shown in the white circle on the screen.

Unlocking Your Device

1. Press and hold the Power button on your Sentry K300 device until the OLED screen illuminates.

2. Enter the device password when prompted, then press Enter. For more information on button

functionality, see

3. The device will display connection options. For more information on screen selection, see

Screen

Selection.

4. Select the appropriate option and press Enter to unlock the device.

Note: If no selection is made in 60 seconds, the device will time out and power off.

5. Plug in the device. For more information, see

Screen Selection

After unlocking your Sentry K300 you will be presented with the following selections.

• Connect: The device will connect in normal read/write mode after plugging it into a compati-

ble system.

Button

Roles.

Sentry K300 Managed User Guide

Accessing The Sentry

K300.