DataLocker Sentry K300 배포 매뉴얼 - 페이지 9

{카테고리_이름} DataLocker Sentry K300에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DataLocker Sentry K300 10 페이지. Encrypted keypad mssd with oled screen
DataLocker Sentry K300에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 검토자 매뉴얼 (10 페이지)

페이지 인쇄

5. Click Save when done.

Once the policy is enabled, K300s using that policy will receive a new settings entry in the Control

Panel after a policy update. (Policy updates happen two minutes after unlock or manually when a

user clicks Check for Updates.)

The End User will request Standalone Logins by clicking the settings gear in the Control Panel,

selecting Standalone, then entering the reason for the request, and ﬁnally clicking the Request

button.

The next time the password is entered on the K300, the End User will be prompted to select

STANDALONE or SAFECONSOLE. Selecting Standalone will proceed to the connection menu where

CONNECT or READ ONLY MODE can be used to connect the K300 to a host computer. Selecting

one of these modes will mount the secure volume directly without needing to run the Unlocker

client or mounting the virtual CD drive. If SAFECONSOLE is selected, then the Unlocker client will

need to be opened like normal.

The Standalone counter will decrease by one every time STANDALONE mode is selected on the

K300 and connected to a computer. Once the counter reaches zero, then the End User will need

to unlock in SafeConsole and request more.

Note: If a ﬁle is placed on the K300 Secure Volume in Standalone mode, which is restricted by the

Anti-Malware or File Restriction SafeConsole policies, it will be deleted after unlocking in SafeConsole

mode.

Sentry K300 SafeConsole Deployment guide