Elsner KNX L 기술 사양 및 설치 지침 - 페이지 4

{카테고리_이름} Elsner KNX L에 대한 기술 사양 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsner KNX L 8 페이지. Brightness sensor

Elsner Elektronik does not assume any liability for changes in standards after publica-

tion of this instruction manual.

2.2. Location

Select an assembly location at the building where sun may be collected by the sensors

unobstructedly. The sensor may not be shaded by the building or for example by trees.

North

South

Wall

pole

horizontal

2.3. Mounting the sensor

2.3.1. Attaching the mount

The sensor comes with a combination wall/pole mount. The mount comes adhered by

adhesive strips to the rear side of the housing.

KNX L brightness sensor • Date of issue: 05.11.2010 • Technical changes reserved. Errors reserved.

Installation and commissioning

Fig. 1

Align the device in a southward direction.

Fig. 2

The sensor must be mounted onto a vertical

wall (or pole).

Fig. 3

The sensor must be mounted horizontally in

the lateral direction.