Datalogic CBX500 설치 매뉴얼 - 페이지 6
{카테고리_이름} Datalogic CBX500에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic CBX500 17 페이지. Scanning connection box
Datalogic CBX500에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (17 페이지)
페이지 인쇄
CBX500 INSTALLATION MANUAL
OPENING THE CBX500
To install the CBX500 or during normal maintenance, it is necessary to open it by unscrewing
the four cover screws:
CAUTION: The CBX500 must be disconnected from the power supply
during this operation.
MECHANICAL INSTALLATION
CBX500 can be mounted to various wooden or plastic surfaces using the two self-threading
screws (3.9 x 45 mm) and washers provided in the package.
Mounting to other surfaces such as concrete walls or metallic panels requires user-supplied
parts (screws, screw anchors, nuts, etc). A mounting template is included in the package to
facilitate hole drilling alignment.
CBX500 can also be mounted to a DIN rail using the BA100 (93ACC1821) mounting
accessory or to a Bosch Frame or 80/20 Frame using the BA200 (93ACC1822) mounting
accessory.
The diagram below gives the overall dimensions of the CBX500 and shows the two mounting
through-holes.
180
[7.1]
6
Mounting
Holes
mm
in
Figure 1 - Overall Dimensions
80.9
4
[3.18]
[0.16]
82.9
[3.26]