Elsner KNX Suntracer pro 설치 및 조정 - 페이지 8
{카테고리_이름} Elsner KNX Suntracer pro에 대한 설치 및 조정을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsner KNX Suntracer pro 16 페이지.
페이지 인쇄3.3. Device connection
ATTENTION!
Sensitive sensors!
•
Only hold the device by the base.
•
Do not mechanically load (bend) the ring and connections.
Caution Lever effect!
The connection to the RS485 bus and the auxiliary voltage is via the bushing in the
base. To do this, screw the base by the base holder.
The cable can be passed through the mast extension or out between base and base
holder.
Weather Station Suntracer RS485 pro • Version: 20.09.2021 • Errors excepted. Subject to technical changes.
6
Fig. 3: View from below (base)
Screw the M8 plug connector on the connec-
tion cable to the connection socket.
1
Connection socket
1
Fig. 4: Cable routing
in mast extension
Installation