Elsner Suntracer KNX-GPS 기술 사양 및 설치 지침 - 페이지 5

{카테고리_이름} Elsner Suntracer KNX-GPS에 대한 기술 사양 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsner Suntracer KNX-GPS 12 페이지.

Please take note that an extended awning does not shade the device from sun and

wind.

Temperature measurements can also be affected by external influences such as by

warming or cooling of the building structure on which the sensor is mounted, (sun-

light, heating or cold water pipes).

Magnetic fields, transmitters and interfering fields from electricity consumers (e.g. flu-

orescent lamps, neon signs, switched-mode power supplies etc.) can interfere with or

even cut out reception of the GPS signal.

Wall

pole

Horizontal

2.1.2. Mounting the weather station

2.1.3. Attaching the mount

The weather station comes with a combination wall/pole mount. The mount comes ad-

hered by adhesive strips to the rear side of the housing.

Fasten the holder vertically to the wall or pole.

Weather Station Suntracer KNX-GPS light • Version: 15.07.2013 • Technical changes reserved. Errors reserved.

Fig. 1

The weather station must be mounted on a

vertical wall (or a pole).

min.

60 cm

Fig. 2

The weather station must be mounted in the

horizontal transverse direction (horizontally).

Installation and commissioning