4IPNET APM100 사용자 설명서 - 페이지 19

{카테고리_이름} 4IPNET APM100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET APM100 20 페이지. Access point

If administrators would like to type a specific IP
address, there is not necessary to type the
segment. (type 192.168.5.44, instead of
192.168.5.44/32)
It is forbidden to switch OFF all IP
Address/Segment which results in there is no
permission to access the WMI anymore.

5.3 Network Interface

The 4ipnet APM100 has 5 physical RJ-45 ports
for supporting most scenarios. These 5 ports
are configured as a switch in default that the IP
address of the ports is the same.
RJ45 Ports
Static: Manually specifying the IP address of
the network interface.
IP Address: Specify an IP address of the
system on a TCP/IP network
Subnet Mask: Determine the local subnet of
the system
Default Gateway: Determine the upper host
of the local network
Preferred DNS Server: The Main DNS server
to translate domain name
Alternate DNS Server: The Secondary DNS
server to translate domain name

5.4 Administrators

This section relates to fundamental
administrators' behaviors and settings.
The Administrators displays the following tabs:

Administrator Group

Administrator Accounts

5.4.1
This section provides 5 customized
administrator groups with a variety of the
accessibility for WMI pages for a particular
management group and in turn, create
management accounts for that group.
Copyright © 2017, 4ipnet, Inc. All rights reserved. All other trademarks mentioned are the property of their respective owners.
Administrator Group
APM100 Access Point Controller
Super Admin is with all authority to
"Read/Write" the system Web Management
Interface, while other groups can be
customized as "Read/Write", "Read Only" or
"Disable" permission of specific management
pages.
5.4.2
Administrator Accounts
Settings
Password Complexity: Enables the admin to
restrict how complex the passwords the
sub-admins should be.
-
Min password Length sets a limit on
the minimum length of a password
string
-
Min password Category allows an
admin to define how complex the
passwords of the sub-admins are
required. Below shows what each
number stands for:
Limit Login Attempts (if enabled): Enter the
number of times you would like sub-admins to
User Manual ENGLISH
19