Dusol DS60W 사용자 설명서 - 페이지 8

{카테고리_이름} Dusol DS60W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dusol DS60W 11 페이지.

4.1 Fixation with clamps (at long side or short side

Fixation with clamps (at long side or short side)

The module clamps should not come into contact with the front glass and must not

The module clamps should not come into contact with the front glass and must not deform the

The module clamps should not come into contact with the front glass and must not

frame. Be sure to avoid shadowing effects from the module clamps. The module frame is not to

frame. Be sure to avoid shadowing effects from the module clamps. The

be modified under any circumstances. When choosing this type of clamp

be modified under any circumstances. When choosing this

please be sure to use at least four clamps on each module, two clamps s

please be sure to use at least four clamps on each

long or short sides of the module. Depending on the local wind and snow loads, if the pressure

long or short sides of the module.

load is more than 2400Pa, additional clamps or support would be required to ensure the module

2400Pa, additional clamps or support would be required to ensure the module

can bear the load. The applied torque sho

bear the load. The applied torque should be big enough to fix it steady, Please find

mounting information in the below illustration, the mounting place distance is

DUSOL Solar Photovoltaic module

MADE IN DUBAI

module, two clamps should be attached on each

Depending on the local wind and snow loads, if the pressure

uld be big enough to fix it steady, Please find detailed

type of clamp-mounting method,