4IPNET WHG311 빠른 설치 매뉴얼 - 페이지 4

{카테고리_이름} 4IPNET WHG311에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4IPNET WHG311 12 페이지. Secure wlan controller

System Overview

Front Panel

Function Buttons: There are four function buttons.

Reset: Press and hold the Reset button for over 3 seconds and status of LED on front panel will

start to blink, release button at this stage to restarting the system. Press and hold the Reset button

for more than 10 seconds and status of LED on the front panel will turn from blinking to off, release

at this stage to reset the system to default configuration.

Quick-Restore: This button is the firmware switch button. Press this button while system is

powering up and release when the "Quick-Restore" LED lights up, the system will switch to the other

firmware image and boot up with that firmware.

Quick-VPN: This button is for establishing a site to site VPN tunnel with minimal pre-configurations

at a push of a button. Please refer to user's manual for detailed operation instructions.

Quick-Maintenance: This button allows admin to copy an exact FW & Configurations from

controller A to controller B except for MAC address. Please refer to user's manual for detailed

operation instructions.

LED Displays: There are five LED light displays.

Power: Power LED lights up as constant yellow green when power supply is on.

Status: Status LED is Blue. Blinking indicates that system OS is booting up, when lit up constantly

indicates that the system is ready for operation.

Quick-Restore: This is used to indicate that the system will now switch to the other F/W partition for

operation.

Quick-VPN: This LED is used for indicating the status of establishing site to site VPN tunnel with

minimal pre-configurations at a push of a button. Please refer to user's manual for detailed status

description.

Quick-Maintenance: This LED is for indicating the status of copying FW & Configurations from

controller A to controller B except for MAC address. Please refer to user's manual for detailed status

description.

WAN1/ WAN2: Two WAN port (10/100/1000 Base-T RJ-45) uplinks to the external network, such as the

ADSL Router from your ISP (Internet Service Provider).

Quick Installation Guide

WHG311

Secure WLAN Controller

WHG311

ENGLISH