Datalogic Gryphon M 00 Series 빠른 참조 매뉴얼 - 페이지 5

{카테고리_이름} Datalogic Gryphon M 00 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic Gryphon M 00 Series 18 페이지.

USING GRYPHON™ M SERIES READERS

The Gryphon™ M series reader, paired with an OM-Gryphon™ cradle, builds a

Cordless Reading System for the collection, decoding and transmission of

barcoded data.

Gryphon™ M readers automatically scan barcodes at a distance. Simply aim

and pull the trigger. Code scanning is performed along the center of the light bar

emitted from the reading window. This bar must cover the entire code.

READING ANGLE

Successful scanning is obtained by tilting the reader with respect to the barcode

to avoid direct reflections, which impair the reading performance, see the figure

below.

Successful reading is obtained by an audible tone plus a good-read green spot.

Good read LED

To start using your Gryphon™ M reading system you must:

Connect an OM-Gryphon™ cradle to the Host. For installation and

connection information see the OM-Gryphon™ Quick Reference Guide.

Charge the Gryphon™ M battery using an OM-Gryphon™ / C-Gryphon™

charger as described in this Quick Reference Guide. A full charge takes

3.5 hours with NiMh battery models.

Configure the reader as described in this Quick Reference Guide.

Configure the OM-Gryphon™ cradle. See OM-Gryphon™ Configuration in

the "OM-Gryphon™ Quick Reference Guide".

Good read spot

GRYPHON™ MX00

Not Advised