Datalogic Magellan 83 빠른 참조 시트 - 페이지 2
{카테고리_이름} Datalogic Magellan 83에 대한 빠른 참조 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic Magellan 83 2 페이지.
Lift Handle
9
Remove the platter and
push the wire lift handle
to the upright position in
preparation for sealing the
calibration door.
IF YOU ENCOUNTER PROBLEMS OR HAVE QUESTIONS ABOUT
October 2013
10
Fully close the calibration
door and apply the
calibration seal in accor-
dance with local require-
ments. The door is fully
closed when the holes in
the door and the metal
tab are aligned. (See
Sealing Notes.)
ANY PART OF THE CALIBRATION PROCESS:
CALL DATALOGIC TECHNICAL SUPPORT:
VIEW THE CALIBRATION VIDEO AT: http://www.youtube.com/watch?v=wHYjcTdd9Gk
1-800-547-2507
820061014 (Rev. A)
Sealing Notes
No portion of the seal,
whether wire, paper
label or other method,
should be in contact
with the weigh frame
(shown in green) or
scale movement will be
compomised.
Conditions to Avoid:
Wire loop too long (not snug)
Calibration door not closed
Seal in contact with weigh frame