Datalogic POWERSCAN 7000 2D Imager 지침

{카테고리_이름} Datalogic POWERSCAN 7000 2D Imager에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic POWERSCAN 7000 2D Imager 4 페이지. Hands free stand

Installing the Stand

1. Determine the best location to position the stand. Some considerations are:

• Proximity to the host. Verify that the stand will be placed within a reasonable distance of the host, and that any

cabling can be routed between the devices without kinking, stretching or exposing cabling to tampering or other

potential damage.

• Stability. Avoid positioning the stand in such a way as to subject it to excess vibration, bumping, spillage, etc.

• Ergonomics. Ensure the user can easily adjust the angle of the imager to maximize comfort and efficiency.

2. The stand's weighted base and traction "feet" allow it to be a stable freestanding unit, however, if you wish to perma-

nently attach it to a table or countertop, use the template provided to locate and mark the position of the screw holes

needed to secure the stand.

Using the Stand

Seat the imager in the holder as shown and route cabling as necessary. For Scan Stand Mode, adjust the

flexible gooseneck to aim the imager at the Scan Stand Symbol located on the stand's base. The unit will

remain idle as long as it sees the Scan Stand symbol. When a different bar code is presented, the Imager

is activated to read the new code.

Alternatively, when the stand is used in Presentation Mode, the imager can be pointed in any direction

desired. For example, it might be pointed outwards to accomodate larger items.

Use in

Scan

Stand

Mode

Scan Stand Symbol

Use in

Presentation

(Screws

Mode

optional)

Hands Free Stand

820064014 (Rev. B)

Instructions

Hands Free Stand

PowerScan

(Screws

optional)

7000 2D

May 2014