Dustbane Integra HD 운영 매뉴얼 - 페이지 3

{카테고리_이름} Dustbane Integra HD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dustbane Integra HD 6 페이지. Polisher floor

Read all instructions before operating and servicing the equipment.

1. Table of Contents

2. Safety

Warning! - To reduce the risk of fire, electrical shock or injury please follow these steps:

• This machine is for commercial use only and should not be used by untrained personnel.

• Connect to a properly grounded outlet only. See grounding diagram.

• Ensure voltage and amperage supply are sufficient for machine. See electrical diagram.

• Do not use outdoors. Do not operate if the unit has been dropped or rained on.

• Operate machine with all covers, guards and safety devices in place.

• Keep feet, hands, hair or loose clothing from any moving parts of the machine.

• Do not handle machine with wet hands when it is plugged in.

• Allow machine to come to a complete stop before letting go of handle.

• Do not use with damaged cord or plug. Do not: pull on cord, run over cord or pull cord around sharp

obstacles. Keep cord away from heated surfaces.

• Floor should be free from any dirt and particles that may become airborne should the revolving floor pad

hit them.

• Do not leave the machine plugged in when unattended or being maintained.

• Use only Original Equipment Manufacturer (OEM) parts supplied by the distributor of this machine.

This floor polishing machine shall be grounded while in use to protect the operator from electric shock. The

machine is provided with a three-conductor cord and a three-contact grounding type attachment plug to fit the

proper grounding type receptacle.

This machine is for use on nominal 120-volt circuit and has a grounding plug that resembles the plug illustrated

in Figure A. Make sure that the machine is connected to an outlet having the same configuration as the plug. No

adapter should be used with this machine.

3. Wiring Diagram

Grounding Instructions

Dual Speed

Single Speed