CB ELECTRONICS TMC-1 설정 매뉴얼 - 페이지 5

{카테고리_이름} CB ELECTRONICS TMC-1에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB ELECTRONICS TMC-1 14 페이지. Connecting with yamaha mmp1
CB ELECTRONICS TMC-1에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지)

페이지 인쇄

[Function] keys

③

The following functions are assigned by default.

[Fn-1]

Speaker Select (Pressing this button allows the [User] keys to select speakers.)

[Fn-2]

A/B Select (Selects either In/Out selections of A or B.)

[Fn-3]

Solo Defeat (Deactivates both Stem Solo and Speaker Solo.)

[User] key

④

The SLS function is assigned by default. Since the MMP1 does not support the SLS function,

assign another function to this key.

[Page] key (U.Bank)

⑤

Returns to the Meters page if the display shows a setup page other than the Meters page.

The U.Bank function is assigned to this key by default.

When the Meters page is displayed, pressing this key switches between two User Key Banks

that can be set for the TMC-1. You can change the User Key functions for each bank using the

TMC-1 setup software. See "To assign a function to the User Keys" on page 11 for details.

Note:

・

The TMC-1's default page is the Meters page.

[Select] key (Spk. Mute)

⑥

Pressing this key allows the User Keys to mute and unmute the speaker outputs.

A different function can be assigned to this key using the TMC-1 setup software.

Pressing the [Page] and [Select] keys simultaneously will display the Select Page.

[Dim] key

⑦

Pressing this key switches the dimmer setting of the monitor outputs between on and off. When

the dimmer is on, the display shows the "Dim" icon in red.

[Mute] key

⑧

Pressing this key will mute or unmute the monitor outputs. When they are muted, the display

shows the "Mute" icon in red.