CB ELECTRONICS TMC-1-MMP1 매뉴얼 - 페이지 4

{카테고리_이름} CB ELECTRONICS TMC-1-MMP1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB ELECTRONICS TMC-1-MMP1 17 페이지. Monitor remote

TMC1-MMP1 Monitor Controller

TMC-1-MMP1 User guide

This document only describes the Ethernet connections of the TMC-1 and any differences in

operation. Please refer to the TMC-1 Reference which is available from the main TMC-1 Web

Page.

http://www.colinbroad.com/cbsoft/tmc1/tmc1.html

The TMC-1 communicates to the MMP1 via Ethernet, when connected to the network it will

discover any connected MMP1's and display them. If it has been paired with a MMP1 and

recognised the Serial number it will select the paired MMP1.

To check the Ethernet connection depress [Select] and [Page] together to enable the Page

select menu. From the Page select menu depress the [E-Net] key to display the MMP1

pages. Use the [<] and [>] keys to step through.

Note 1: Once the TMC-1 discovers the MMP1 selecting the MMP1 on the TMC-1 Discovery

page will set the TMC-1 to be on the same subnet as the MMP1.

Note 2: It may be necessary to set the subnet address of the TMC-1, the default IP address of

the TMC-1 is 169.254.149.250. If you have a DHCP server on your network use the DHCP key

on the Discovery page to select a free IP address, If not you can set the IP Address of the

TMC-1 using the TMC1v5 or Midiupd Mac/Windows programs

Note 3: The MMP1 serial number & Mac address is unique to each unit and are used to

define the destination instead of the IP address.

Version 0.0