CB2 A SYMMETRIC CLOSET 조립 지침 - 페이지 5
{카테고리_이름} CB2 A SYMMETRIC CLOSET에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 A SYMMETRIC CLOSET 5 페이지.
페이지 인쇄
a symmetric
optional wall mounting assembly
C
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each mounting bracket on
the back of the unit.
C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller in diameter
than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting bracket and into
the wall anchor in the wall.
E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.
F) Lace one end of each wall strap through corresponding brackets, and into the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
Made in Vietnam - r06
CLOSET
D
A
F
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
WALL
Page 5 of 5