CB2 CADET 조립 지침 - 페이지 5
{카테고리_이름} CB2 CADET에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 CADET 5 페이지. Wardrobe
CB2 CADET에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)
페이지 인쇄
cadet
CABINET
optional wall mounting assembly
These instructions are for drywall mounting only. For safe installation
it is essential to use hardware appropriate for your wall type. Mount to
wood wall studs whenever possible. If you are unsure of what type of
fasteners to use, consult your local hardware store or a qualified profes-
sional. This product is only a deterrent, it is not a substitute for proper
adult supervision.
A. Attach 2 wall straps to back on unit with 1 small screw per strap as
shown. Secure, but do not over tighten with a phillips head screwdriver.
B. With the assistance of another adult, place the unit in desired location
against the wall. Mark the location of the hole in the wall strap on the
wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1
plastic anchor into each hole until they are flush to the wall.
D. Place the unit back into position against the wall. Insert 1 medium
screw through each wall strap and into the plastic anchor.
Wall mounting is now complete
Made in Thailand- r04
.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
WALL
wall
strap
small
screw
BACK OF UNIT
medium
screw
plastic
anchor
FRONT OF UNIT
cleaning & care
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive
cleaners.
Page 5 of 5