Datalogic MAGELLAN 3200VSI 지침 - 페이지 2

{카테고리_이름} Datalogic MAGELLAN 3200VSI에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic MAGELLAN 3200VSI 2 페이지. 2d upgrade kit

3300HSi Model

Rubber

Cover

microSD Card Slot

4. Wait for five seconds after hearing the audio indication (a rapid sequence of tones indicates the upgrade has started) before

proceeding. This will give the scanner time to complete the upload.

5. Push in gently using your finger or thumbnail to disengage and remove the microSD card. Remember to keep your finger

in place atop the card's edge to avoid accidentally "launching" the card from the spring-loaded slot.

6. Reconnect all cables which were disconnected earlier.

7. Your scanner is now ready to scan PDF 417 and Datamatrix bar codes. All other 2D symbologies will need to be enabled

using programming bar codes which can be found in the Product Reference Guide (PRG) or by using the Magellan On

Screen Programming (OSP) utility available from the website at www.scanning.datalogic.com.

8. Test the scanner's new 2D reading ability by scanning sample 2D bar codes of the type(s) you need to read. Once you have

verified the scanner's new capability, re-install the unit in its original position.

Push down past

flush to seat,

then carefully

microSD Card

release

Scanner

820043714 (Rev. B)

3200VSi Model

Rubber

Cover

Seated card

microSD

Card Slot

November / 2011