CB2 MINI CHILL 조립 지침 매뉴얼 - 페이지 2
{카테고리_이름} CB2 MINI CHILL에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 MINI CHILL 6 페이지. Media console
페이지 인쇄
mini chill
NOTE: Do not over
tighten the cam
screws
B
A. Insert 4 cams into middle panel as shown. Make
sure arrows on each cam point toward nearest edge
with holes.
B. Insert 4 cam screws, 6 wood dowels and 2
cams into left and right side panels as shown.
Secure, but do not over tighten, cam screws with a
1
phillips head screwdriver.
A
top panel
bottom
B
panel
A. Insert 6 wood dowels and 6 cam screws into
top panel as shown.
3
B. Insert 4 cams into bottom panel as shown.
Made in Vietnam - r03
MEDIA CONSOLE
A
middle
panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
left and right
side panels
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A
partition
B
apron
A. Insert 2 wood dowels and 2 cams into partition
as shown.
2
B. Insert 2 wood dowels into apron as shown.
NOTE: Do not over
tighten the bolts
apron
Fit dowels of apron into corresponding holes of
bottom panel as shown. Secure bottom panel with
2 bolts, 2 spring washers, and 2 flat washers,
using a phillips head screwdriver. Do not over
4
tighten the bolts.
bottom
panel
Page 2 of 6