CB2 MONOLITH 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} CB2 MONOLITH에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 MONOLITH 13 페이지. Wardrobe
CB2 MONOLITH에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)
페이지 인쇄
monolith
top
panel
A
B
A. Fit cam screws of top panel into correspond-
ing holes of partition shown. Secure cams.
B. Secure left and right side panels to top
panel with 2 bolts, 2 spring washers and 2 flat
9
washers.
A
B
small
door
A. With assistance of another adult, position unit
upright. Attach hinges of large door to right
side panel with 4 hinge screws per hinge.
B. Attach hinges of small door to left side
11
panel with 4 hinge screws per hinge.
Made in Vietnam - r03
WARDROBE (LEFT)
B
A
B
large
Refer to Hinge Adjustment
door
diagram for adjusting the
alignment of the door hinges.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A. Attach 3 hinges to large door with 2 hinge
screws per hinge as shown, using a screw-
driver. Do not over tighten the screws.
B. Attach 3 hinges to small door with 2 hinge
10
screws per hinge.
A
A. Insert 16 shelf supports at desired shelf
heights.
B. Place 2 large adjustable shelves and 2
small adjustable shelves into assembly. Make
sure shelves are securely supported by shelf
12
supports.
NOTE: Do not over
tighten the screws
large
A
door
small
B
door
large
adjustable
shelf
B
small
adjustable
shelf
A
Page 4 of 6