CB2 STELLA 조립 지침 - 페이지 5

{카테고리_이름} CB2 STELLA에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 STELLA 5 페이지. Cabinet

stella

CABINET

optional wall mounting instructions

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe

mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).

Mount to wood studs whenever possible.

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a

qualified professional or your local hardware store.

A. Attach 2 brackets to the top of the assembled unit with 2 small screws per bracket.

B. With the assistance of another adult, place the unit in desired location against the wall. Mark the

location of the hole in the bracket on the wall. Move the unit out of the workspace.

C. Drill holes slightly smaller in diameter than the anchors. Insert 1 plastic anchor into each hole until

they are flush to the wall.

D. Insert 2 large screws through each bracket and plastic anchor. Secure, but do not over tighten with

a phillips head screwdriver.

E. Place the unit back into position against the wall and thread a wall strap through each bracket and

pull until tight.

Wall mounting assembly is now complete.

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

Made in Vietnam - r05

Page 5 of 5