Datalogic LD46 지침 - 페이지 3

{카테고리_이름} Datalogic LD46에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic LD46 4 페이지. Luminescence sensors

페이지 인쇄
INDICATORS AND SETTINGS
CONNECTIONS
DETECTION DIAGRAMS
Standard 9 mm lens
(2 x 8 mm spot at 10 mm)
156
CATALOG | Photoelectric Sensors
A
yellow OUTPUT LED
A
C
D
B
B
green READY LED
TL    SERIES
TL    SERIES
C
orange DELAY LED
E
INSTRUCTION MANUAL
INSTRUCTION MANUAL
D
orange KEYLOCK LED
E
Bargraph
CONTROLS
CONTROLS
F
G
F
OUTPUT LED
OUTPUT LED
The red LED indicates the output status.
The red LED indicates the output status.
READY LED
READY LED
LD46-UL
During functioning, the green LED permanently ON indicates a normal
During functioning, the green LED permanently ON indicates a normal
operating condition; fast blinking indicates an output overload condition.
operating condition; fast blinking indicates an output overload condition.
See the "SETTING" paragraph for setup procedure indications.
See the "SETTING" paragraph for setup procedure indications.
MARK / BKGD PUSHBUTTON
MARK / BKGD PUSHBUTTON
The pushbutton activates the setup procedure.
The pushbutton activates the setup procedure.
INSTALLATION
INSTALLATION
Operating
distance
is
Operating
distance
is
rated
starting from the lens front face.
starting from the lens front face.
The M12 connector or cable exit
The M12 connector or cable exit
can be rotated in three positions
can be rotated in three positions
by loosening the locking screw.
by loosening the locking screw.
Tighten the locking screw when
Tighten the locking screw when
finished.
finished.
The beam direction may be
The beam direction may be
changed swapping the cap and
changed swapping the cap and
the lens.
the lens.
Detecting marks on a reflective surface is improved adjusting the beam
Detecting marks on a reflective surface is improved adjusting the beam
direction to 5° ... 20° from surface axis.
direction to 5° ... 20° from surface axis.
M12 CONNECTOR
CONNECTIONS
CONNECTIONS
BROWN
BROWN
RED
RED
ORANGE
ORANGE
GREY
GREY
WHITE
WHITE
BLUE
BLUE
*
*
= Connect the unused REMOTE wires to 0 V.
= Connect the unused REMOTE wires to 0 V.
**
**
= The cable shield is insulated from the sensor housing; it is recommended
= The cable shield is insulated from the sensor housing; it is recommended
to connect the shield to 0 V.
to connect the shield to 0 V.
M12 CONNECTOR
M12 CONNECTOR
ANALOG OUTPUT
ANALOG OUTPUT
(WHITE)
(WHITE)
-
0 V
0 V
(BLUE)
(BLUE)
mm
Standard 22 mm lens
(3 x 11 mm spot at 24 mm)
F
G
rated
+
+
10 ... 30 Vdc
10 ... 30 Vdc
REMOTE A *
REMOTE A *
REMOTE B *
REMOTE B *
ANALOG OUTPUT
ANALOG OUTPUT
NPN/PNP
NPN/PNP
0 V
0 V
SHIELD **
SHIELD **
+
+
10 ... 30 Vdc
10 ... 30 Vdc
2
2
1
1
(BROWN)
(BROWN)
3
3
4
4
-
NPN/PNP
NPN/PNP
(BLACK)
(BLACK)
mm
TL
-x6x
TL
-x6x
7.5
7.5
+/- push-buttons
SET push-button
18 mm LENS
18 mm LENS
.
.
READY LED
READY LED
OUTPUT LED
OUTPUT LED
MARK
MARK
BKGD
BKGD
PUSHBUTTON
PUSHBUTTON
PUSHBUTTON
PUSHBUTTON
Power supply:
Power supply:
Ripple:
Ripple:
Current consumption
Current consumption
(output current excluded):
(output current excluded):
Output:
Output:
Output current:
Output current:
Analog output:
Analog output:
Output saturation voltage:
Output saturation voltage:
Response time:
Response time:
Switching frequency:
Switching frequency:
Timing function:
Timing function:
Indicators:
Indicators:
Setting:
Setting:
Retention data:
Retention data:
Operating temperature:
Operating temperature:
Storage temperature:
Storage temperature:
Electric shock protection:
Electric shock protection:
Operating distance:
Operating distance:
Minimum spot dimension:
Minimum spot dimension:
Depth of field:
Depth of field:
Emission type:
Emission type:
Ambient light rejection:
Ambient light rejection:
Vibration:
Vibration:
Shock resistance:
Shock resistance:
DARK/LIGHT selection:
DARK/LIGHT selection:
Housing:
Housing:
Protection class:
Protection class:
Connections:
Connections:
Weight:
Weight:
CONFIGURATION
CONFIGURATION
A double selector and a switch are
A double selector and a switch are
REMOTE
available removing the sensor side
available removing the sensor side
cover. The selector allows to enable the
cover. The selector allows to enable the
output timing function and choose the
output timing function and choose the
FORMAT
pushbuttons
pushbuttons
and
and
REMOTE
REMOTE
inputs
inputs
operating mode; the switch allows to select the output type (NPN or
operating mode; the switch allows to select the output type (NPN or
PNP).
PNP).
Standard 40 mm lens
(4 x 15 mm spot at 50 mm)
DIMENSIONS
DIMENSIO
81.2
81.2
n°.4 M5x6
n°.4 M
4.3
4.3
n°.4 M5x0.2
n°.4 M
14.1
14.1
27.5
27.5
28
9 mm LENS
9 mm LENS
36.6
36.6
28
28
CAP
CAP
TECHNICAL DA
TECHNICAL D
10 ... 30 V
10 ... 30 Vdc
NPN or PNP, pull
NPN or PNP, pull dow
0 ... 2 V ± 10% (white 90%); 5.5
0 ... 2 V ± 10% (white 90%)
1V max. NP
1V max
50 s
50
10 kHz
10 k
2
OUTPUT L
OUTPU
by pushbutto
by pushbuttons /
non
9 mm (T
9 m
1.5 x 5 mm (TL
1.5 x 5 mm (TL-x1
± 3 mm (T
± 3 mm
green (526 nm) / red (630
green (526 nm) / red (6
a
0.5 mm amplitude, 10 ...
0.5 mm amplitude,
11 ms (30 G)
11 ms (30
3 m shielded c
3 m shield
450 g. max. cable
450 g. max. c
R
REMOTE
TIMING
TIMING
ON
ON
%
SET
SET
ON
ON
10
FORMAT
OFF
OFF
8
1
2
1
2
6
4
2
mm