Dustless DuctlessVac D1603 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Dustless DuctlessVac D1603에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dustless DuctlessVac D1603 13 페이지. D16 series
Dustless DuctlessVac D1603에 대해서도 마찬가지입니다: 소유자 매뉴얼 (8 페이지)

페이지 인쇄

SETUP

1. Remove entire contents of box.

2. Slide legs into slots with the legs with the

hooks in the back. Screw in screws.

3. Attach tool tray.

4. Place intermediate on barrel. Use clips to

secure in place.

5. Slide one end of the hose into the port.

Slide desired attachments on to the other

end of the hose.

WUNDERBAG INSTALLATION

1. Place the cardboard collar with the rubber

gasket securely over the intake port on the

inside of the barrel.

2. Reach inside the port and with your fingers

press cardboard tight and secure around

port.

WET PICKUP

1. Vacuum should be emptied of any dry

waste. Filters can remain in place. Note:

Should filters become wet, dry both filters

thoroughly before continued use.

2. Connect hose and desired attachment.

3. After use or when barrel is full turn off

vacuum and disconnect from outlet.

Note: When barrel is full the automatic shut-

off mechanism will shut off vacuum pickup.

When this happens, the motor will become

noticeably higher pitch.

4. Empty barrel by unscrewing drain cap. Drain

is regulated so liquid can go from a drip to a

full flow. Note: Hose can be put in the drain

cap to drain up to 12 feet away.

Customer Service Helpline 1.800.568.3949 dustlesstools.com