Datalogic Jet 사용자 설명서 - 페이지 2

{카테고리_이름} Datalogic Jet에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic Jet 2 페이지. Vehicle cradle
Datalogic Jet에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (2 페이지)

페이지 인쇄
Datalogic Jet 사용자 설명서
By inserting the Datalogic Jet™ PDA into the cradle, data can be transmitted to the host and its battery
begins charging if the power supply is connected. In addition, an extra battery can be charged by inserting
it into the slot at the back of the Datalogic Jet™ Single Cradle Desk as shown in the following figure.
Extra Battery
Charge Slot
Figure 2 – Datalogic Jet™ Single Cradle Desk Charging
The LEDs positioned on the front part of the Datalogic Jet™ Single Cradle Desk (see figure below)
indicate the cradle and extra battery charger status:
Extra Battery
Charger LED
Figure 3 - LED Indicators
LED
STATUS
Charger
Red Constant:
Green Constant:
Orange Blinking:
Power
Green:
Data Transmission and
PDA Battery Charging
Power LED
charging
charge completed
error
it is constant when the cradle is powered
The Datalogic Jet™ Single Cradle Desk can be connected to a host by means of an RS232 interface, or a
USB interface.
RS232 CONNECTION
A single Datalogic Jet™ Single Cradle Desk can be connected to the host by means of any standard null
modem cable. The 9-pin female D-Sub connector must be connected to the RS232 port of the cradle.
Once the host has been turned on, insert the Datalogic Jet™ PDA into the cradle.
A
Figure 4 - RS232 Connection
A)
Host Computer
C)
Datalogic Jet™ Single Cradle Desk
*
Recommended power supply: 94ACC4595 FPS18 W/O POWER CORD.
USB CONNECTION
Datalogic Jet™ Single Cradle Desk can be connected to the host by means of a CAB-381 cable (USB
straight cord).
Once the host has been turned on, insert the Datalogic Jet™ PDA into the cradle.
A
Figure 5 - USB Connection
A)
Host Computer
C)
Datalogic Jet™ Single Cradle Desk
*
Recommended power supply: 94ACC4595 FPS18 W/O POWER CORD.
B
C
D*
B)
Standard Null Modem Cable
D)
*Power Supply (only necessary for battery charging)
B
C
D*
B)
94A051550 CAB-381 USB Type A-B Straight Cable
D)
*Power Supply (only necessary for battery charging)